Ampeg Rocket Bass RB‑110 Settings Resource
Dials, Suggestions, and Tone Tips
Note: These settings are approximate and subject to the rest of your gear, They're meant to be helpful, but not exclusive..
Amp Model: Ampeg Rocket Bass RB‑110
Amp Type: Master knob controls speaker/DI output
Controls: Volume; Bass; Mid; Treble; SGT Grit; Aux IN; Headphones; XLR DI
Ampeg Rocket Bass RB‑110 Settings Suggestions
Bluesy Clean
Warm, round, and lightly compressed tone. Ideal for vintage-style blues, soul, or jazz playing with some bite. Keep Grit off or subtle for added warmth.
- Volume: 6
- Bass: 6
- Mid: 7
- Treble: 5
- SGT Grit: 2
- Gain: 3
Modern Slap
A tight, scooped tone with enhanced highs and lows. Perfect for funk or slap bass styles. Keep mids cut to emphasize percussive attack.
- Volume: 7
- Bass: 8
- Mid: 3
- Treble: 8
- SGT Grit: 1
- Gain: 2
High-Gain Rock / Metal
Aggressive, dirty tone with heavy low and grit. Perfect for distorted bass lines or tuning down into heavier genres. Turn SGT Grit up for added drive.
- Volume: 5
- Bass: 8
- Mid: 6
- Treble: 7
- SGT Grit: 9
- Gain: 9
Classic Motown / Vintage Flatwound
Thick and smooth with reduced highs—great for flatwound strings or holding down classic grooves. Keep it low and supportive in the mix.
- Volume: 6
- Bass: 8
- Mid: 4
- Treble: 2
- SGT Grit: 0
- Gain: 2
Midrange Punch / Pick Attack
Ideal for punk, indie, or pop with strong fingerstyle or pick attack. Accentuated mids help the bass cut through a dense mix.
- Volume: 7
- Bass: 5
- Mid: 8
- Treble: 6
- SGT Grit: 6
- Gain: 6
Gear Suggestions for the Ampeg Rocket Bass RB‑110
- Fender Jazz Bass: Classic pairing for warm, rounded tones with great midrange articulation—ideal for funk, soul, and rock settings with the RB‑110’s vintage voicing.
- Music Man StingRay: Punchy active electronics cut through the mix; blends well with the amp’s SGT (Super Grit Technology) circuit for modern slap and aggressive rock tones.
- Darkglass Microtubes X: Adds tight distortion and low-end clarity; complements the RB‑110’s built-in grit while providing more intensity and control over distortion layers.
- Boss GEB-7 Bass Equalizer: Allows precise tone shaping to fully utilize the RB‑110’s vintage voicing; essential for dialing in specific frequencies or taming boomy rooms.
- MXR M82 Bass Envelope Filter: Funky, expressive filter sounds shine through the RB‑110’s clean response and tight low-end, great for adding texture without overwhelming the amp’s voice.
More Tone Tips and Best Practices
- Store in a dry, room-temperature environment to prevent moisture damage and preserve electronics.
- Keep amp elevated off floors to minimize vibration and dust intake.
- Use Gain and Volume controls together to balance tone clarity and output without introducing unwanted distortion.
- Utilize Ultra Hi and Ultra Lo switches for quick tonal shaping depending on playing style and instrument type.
- Maximize tonal articulation with EQ settings—flat response is best for neutral tone; boost lows for depth, mids for presence, highs for clarity.
- Keep overall volume at moderate levels (50–70%) during practice for optimal speaker longevity and clean output.
- Not ideal for large live performances due to 50W output; suitable for small venues, jams, and studio use.
- Connect to PA or external speaker for live use via the balanced XLR line out for better projection and sound reinforcement.
- Allow sufficient ventilation space around rear vents to prevent overheating during extended sessions.
- Disconnect power when not in use to protect internal components and conserve energy.
More Amp and Tone Settings Resources
Written by Bobby Kittleberger on Amp Settings
Written by Guitar Chalk on Song Settings
We link to products on Sweetwater and Reverb that help support our site and keep the lights on. If you click through our orange buttons, we might earn a commission at no extra cost to you. Thank you all for your generous support over the years! ~ Bobby and Danielle
Our disclosure↬
There is no ultra high or ultra low on an Ampeg RB110 amplifier.