Blackstar amPlug 2 FLY Settings Resource
Dials, Suggestions, and Tone Tips
Note: These settings are approximate and subject to the rest of your gear, They're meant to be helpful, but not exclusive..
Amp Model: Blackstar amPlug 2 FLY
Amp Type: Headphone/portable bass amp
Controls: Gain; Tone (ISF); Volume; Voice switch (Classic/Modern/Overdrive); Tap Tempo/Looper selection
Blackstar amPlug 2 FLY Settings Suggestions
Bluesy Clean
Warm with slight breakup when you dig in. Great for modern or vintage blues riffs or leads with dynamic response.
- Gain: 3
- ISF (Tone): 4
- Volume: 7
- Voice: Classic
Funky Clean Rhythm
Tight and sparkly, aimed at percussive playing, single coils, and light compression. Cutting high-end chime with body.
- Gain: 2
- ISF (Tone): 3
- Volume: 8
- Voice: Modern
Classic Rock Crunch
Crunchy, mid-gain tone with fullness and grit. Suited for classic rock rhythm and lead tones with fat mids.
- Gain: 6
- ISF (Tone): 5
- Volume: 7
- Voice: Classic
High-Gain Metal
Aggressive, saturated tone with tight low end and sharp top end. Best for modern metal riffing and soloing.
- Gain: 9
- ISF (Tone): 9
- Volume: 6
- Voice: Overdrive
Smooth Lead w/ Delay
Singing lead tone with built-in delay for ambiance and sustain. Focused highs and balanced mids make it expressive.
- Gain: 7
- ISF (Tone): 6
- Volume: 7
- Voice: Modern
- Tap Delay: Set to medium decay (approx. 400ms)
Gear Suggestions for the Blackstar amPlug 2 FLY
- Fender Stratocaster: Great for crisp cleans and responsive dynamics, pairs well with the amPlug 2 FLY’s clean and crunch channels for vintage blues and funk tones.
- Epiphone Les Paul Standard: Ideal for thick, saturated distortion tones on the Overdrive channel; delivers rich sustain and warmth perfect for classic rock and lead work.
- TC Electronic Hall of Fame 2 Reverb: Adds spaciousness and depth to compensate for the amPlug’s dry output; especially useful for headphone-only setups.
- Boss SD-1 Super Overdrive: Pairs well to boost and shape the amPlug’s gain stages without muddying the tone, great for pushing crunch into lead territory.
- Line 6 Relay G10S Wireless System: Keeps your setup compact and cable-free—perfect for maximizing mobility when practicing with the amPlug at home or on the go.
More Tone Tips and Best Practices
- Store in a cool, dry place away from direct heat and moisture.
- Unplug batteries when not in use for extended periods to prevent leakage.
- Set gain low for clean tones; increase gradually for distortion.
- Adjust EQ to suit headphones, as response may vary by model.
- Use crunch or overdrive modes sparingly to avoid tonal muddiness.
- Lower volume to reduce noise floor and preserve battery life.
- Ideal headphone impedance: 32–64 ohms for optimal performance.
- Volume should be comfortable; prolonged loud use may damage hearing.
- Primarily intended for personal practice, not suited for live performance.
- Not designed for direct PA input or large-scale amplification.
- Use with quality headphones for best tone reproduction.
More Amp and Tone Settings Resources
Written by Bobby Kittleberger on Amp Settings
Written by Guitar Chalk on Song Settings
We link to products on Sweetwater and Reverb that help support our site and keep the lights on. If you click through our orange buttons, we might earn a commission at no extra cost to you. Thank you all for your generous support over the years! ~ Bobby and Danielle
Our disclosure↬
LEAVE A COMMENT